Shimano Software Flash Home – For end users

For Shimano Steps EP8 / E8000 / E7000 / E6100/5000
Di2 version included

Software developed by Eplus to be installed on your PC, to customize the factory parameters without the need to install hardware in the motor.

CHANGES IN DETAIL:

Categories: ,

Description

CHANGES FOR SHIMANO STEPS EP8
For Shimano EP8 motors and bikes, for uses permitted by law *, we offer the following options:
Change speed 35 km/h – Ensures assistance at speeds up to 35 km/h with correct display of the data on the display; change always active.
Change speed 50 km/h – Ensures assistance at speeds up to 50 km/h with correct display of the data; change always active.
“Race” modification – Ensures assistance up to a speed of 50 km/h with correct display of the data on the display; change always active.
The Race version increases the curves of all assistance levels by 30% and optimizes the speed curve: the e-bike is more reactive and offers better performance under stress.
Although the torque is not changed, the sensation, however, is of an increase of about 10Nm which is especially noticeable uphill.

For Shimano EP8: compatibility up to the latest Shimano 4.1.5 version
Minimum requirements: SM-PCE1 or SM-PCE2 interface, Windows 10 or newer, USB port, Internet connection , EW-SD300 cable and EW-AD305 adapter

 


 

CHANGES FOR SHIMANO STEPS E8000
For Shimano 8000 motors and bikes, for uses permitted by law *, we offer the following options:
Modification 50 km/h – Ensures assistance up to a speed of 50 km/h with correct display of the data on the display; change always active. The use of the appTutor allows the adjustment of the ECO parameters and blocks the motor as a deterrent against theft.
“Race” modification – Ensures assistance up to a speed of 50 km/h with correct display of the data on the display; can be activated / deactivated from the application. It is possible to remapping the engine power from the Tutor application for setting pedal assistance, wheel torque and engine power for each individual mode of use, thus allowing you to customize the driving experience to the highest level.
The end customer can download the Tutor app for Android and iOs for free to modify the mapping directly. To change the speed from the app, an in app purchase is required for € 0.99.

Compatibility up to the latest Shimano version 4.9.0
Minimum requirements: SM-PCE1 or SM-PCE2 interface, Windows 10 or newer, USB port, Internet connection.

 


 

CHANGES FOR SHIMANO STEPS E7000
– Change speed 35 km/h –
Ensures assistance at speeds up to 35 km/h with correct display of the data on the display; change always active.
Change speed 50 km/h – Ensures assistance at speeds up to 50 km/h with correct display of the data; change always active.
“Race” modification – Ensures assistance up to a speed of 50 km/h with correct display of the data on the display; change always active.
The Race version increases the curves of all assistance levels by 30% and optimizes the speed curve: the e-bike is more reactive and offers better performance under stress.
Although the torque is not changed, the sensation, however, is of an increase of about 10Nm which is especially noticeable uphill.


Compatibility up to the latest Shimano 4.7.2 version
Minimum requirements: SM-PCE1 or SM-PCE2 interface, Windows 10 or newer, USB port, Internet connection.

 


 

CHANGES FOR SHIMANO STEPS E 6100/E5000
For Shimano E6100/5000 motors and bikes, for uses permitted by law *, we offer the following options:
Modification at 35 or 50 km/h – Ensures assistance up to a speed of 35 or 50 km/h with correct display of the data; change always active.

For Shimano Steps 6100: compatibility up to the latest Shimano 4.7.2 version
For Shimano Steps 5000: compatibility up to the latest Shimano 4.4.4 version

Minimum requirements: SM-PCE1 or SM-PCE2 interface, Windows 10 or newer, USB port, Internet connection.

 

Additional information

MANUAL:

https://cutt.ly/CncqdW3

Go to Top