Shimano Software Eplus Flash – pc installation

For Shimano Steps EP8 / E8000 / E7000 / E6100 / E5000
Di2 version included
For resellers only

Software developed by Eplus to be installed on your PC, to customize the factory parameters without the need to install hardware in the motor.

CHANGES IN DETAIL:

Categories: ,

Description

CHANGES FOR SHIMANO STEPS EP8
For Shimano EP8 motors and bikes, for uses permitted by law *, we offer the following options:
Change speed 35 km/h – Ensures assistance at speeds up to 35 km/h with correct display of the data on the display; change always active.
Change speed 50 km/h – Ensures assistance at speeds up to 50 km/h with correct display of the data; change always active.
“Race” modification – Ensures assistance up to a speed of 50 km/h with correct display of the data on the display; change always active.
The Race version increases the curves of all assistance levels by 30% and optimizes the speed curve: the e-bike is more reactive and offers better performance under stress.
Although the torque is not changed, the sensation, however, is of an increase of about 10Nm which is especially noticeable uphill.

For Shimano EP8: compatibility up to the latest Shimano 4.1.6 version

Minimum requirements: SM-PCE1 or SM-PCE2 interface, Windows 10 or newer, USB port, Internet connection , EW-SD300 cable and EW-AD305 adapter.
SM-PCE1 not compatible with Shimano E-TUBE 5.0.1 version


 

CHANGES FOR SHIMANO STEPS E8000
For Shimano 8000 motors and bikes, for uses permitted by law *, we offer the following options:
Modification 50 km/h – Ensures assistance up to a speed of 50 km/h with correct display of the data on the display; change always active. The use of the appTutor allows the adjustment of the ECO parameters and blocks the motor as a deterrent against theft.
“Race” modification – Ensures assistance up to a speed of 50 km/h with correct display of the data on the display; can be activated / deactivated from the application. It is possible to remapping the engine power from the Tutor application for setting pedal assistance, wheel torque and engine power for each individual mode of use, thus allowing you to customize the driving experience to the highest level. THE
The end customer can download the Tutor app for Android and iOs for free to modify the mapping directly. To change the speed from the app, an in app purchase is required for € 0.99.

Compatibility up to the latest Shimano version 4.9.0

Minimum requirements: SM-PCE1 or SM-PCE2 interface, Windows 10 or newer, USB port, Internet connection.
SM-PCE1 not compatible with Shimano E-TUBE 5.0.1 version


 

CHANGES FOR SHIMANO STEPS E7000
– Change speed 35 km/h – Ensures assistance at speeds up to 35 km/h with correct display of the data on the display; change always active.
Change speed 50 km/h – Ensures assistance at speeds up to 50 km/h with correct display of the data; change always active.
“Race” modification – Ensures assistance up to a speed of 50 km/h with correct display of the data on the display; change always active.
The Race version increases the curves of all assistance levels by 30% and optimizes the speed curve: the e-bike is more reactive and offers better performance under stress.
Although the torque is not changed, the sensation, however, is of an increase of about 10Nm which is especially noticeable uphill.


Compatibility up to the latest Shimano 4.7.2 version

Minimum requirements: SM-PCE1 or SM-PCE2 interface, Windows 10 or newer, USB port, Internet connection.
SM-PCE1 not compatible with Shimano E-TUBE 5.0.1 version


 

CHANGES FOR SHIMANO STEPS E 6100/E5000
For Shimano 7000/6100/5000 motors and bikes, for uses permitted by law *, we offer the following options:
Modification at 35 or 50 km/h – Ensures assistance up to a speed of 35 or 50 km/h with correct display of the data; change always active.

For Shimano Steps 6100: compatibility up to the latest Shimano 4.7.2 version
For Shimano Steps 5000: compatibility up to the latest Shimano 4.4.5 version

Minimum requirements: SM-PCE1 or SM-PCE2 interface, Windows 10 or newer, USB port, Internet connection.
SM-PCE1 not compatible with Shimano E-TUBE 5.0.1 version

FIND OUT WHY WE ARE THE BEST
All the advantages of Eplus Flash for Shimano E8000

1. The data shown on the display is correct.
2. All settings made with the Eplus Flash software are reversible, so you can go back to the original factory version at any time, which is particularly useful if you need official assistance.
3. In addition, once the E8000 has been unlocked with Eplus Flash, the end customer can use our “Tutor” app for Android and iOs (for € 0.99) to control assistance and speed wirelessly from their smartphone. The app also has an anti-theft function that blocks the motor.
4. It is also possible to reduce the Eco mode to a wider and more customizable range of values ​​than E-Tube, a modification much requested by Shimano Steps customers.
5. No downgrade is required to use the software. The downgrade, necessary for other systems on the market, is a risky operation, especially if performed from the app.
6. Our team is constantly developing to update our products
7. We give free technical support via email.
8. Finally, you can make as many modifications as you like on the same bike without paying more.

Additional information

MANUAL:

https://cutt.ly/ZW9ssCr

Go to Top